PPS John Deere 1700 Mini Hopper Kit (New)

Reamer is needed and we have them available for purchase

The PPS Flange Bushing “Rebuild Your Own” kits for planters make your old and worn parallel linkage arms better than new! All of the wear takes place on replaceable parts instead of on your planter’s parallel linkage arms.
Worn parallel linkage arms and bushings are a common problem with today’s planters. Since the implementation of down-pressure enhancing products, this problem has only gotten worse. In the past, worn parallel linkage arms
and bushings have always had to be replaced with new ones. With the PPS Flange Bushing “Rebuild Your Own” Kits, there is no longer any wear on the parallel linkage arms. All of the wear is on the kit’s replaceable parts. These parts
include a hardened flange bushing and a threaded hex bushing that fits into the flange bushing. . Installation is simple by reaming out the four mounting plate holes and shank face plate holes to accept the larger diameter bushing. Existing parallel arm sets will need to be reamed out as well so the existing worn hole in the arm is made a little larger for a more precise fit for the bushings.

Select kit based on planter/row unit model and wear measurements (1-1/16”, 1-1/8”, 1-3/16”).

Disclaimer: We sell used and new parts – every used piece slightly differs in condition. All of our products are in good/usable condition. Quantities available are subject to change.